• Line Rate: 0.3, 1.2, 2.4, 4.8, 7.2, 9.6, 12, 14.4, 16.8, 19.2, 21.6, 24, 26.4, 28.8, 31.2, 33.6, 56Kbps*
• DTE Rate: Virtual DTE, 460.8Kbps maximum
• Operation: Half or full-duplex over 2-wire dial-up line
• Asynchronous Linking: Auto dial / answer, auto bauding, MNP10 auto fall-back/forward
• Flow Control: RTS/CTS, XON/XOFF (software selectable)
• Compatibility: Bell 103; 212A, ITU-T V.21; V.22A/B; V.23; V.22bis; V.32; V.32bis; V.34; K56Flex; V.90;
• Error Correction: ITU-T V.42, MNP4 (auto-match)
• Data Compression: ITU-T V.42bis, MNP5 (auto-match)
• Receive Sensitivity: -37 dBm
• Command Set: AT command and Escape sequence
• LED: TR: ( Transmission: Data Access )  OH: ( Off-Hook: Line Seize )

Voice Operation

• Operation: Telephone Answering Machine (TAM); voice mail system
• Voice decode: ADPCM
• FDSP: Acoustic and line echo cancellation, microphone gain / muting, speaker volume control / muting

FAX Operation

• Speed: Up to 14400 bps Supports Group 3 fax requirements.
• Compatibility: Group 3 with T.30 protocol over ITU V.17; V.21 ch2; V.27ter; V.29
• Command Set: TR-29 Class 1

  General Specification

• Modem Kernal: SmartLink
• ST USB Interface Solution
• Up to 56K Data (download), V.34 speed send data
• Standard AT Command
• Fax Support up to 14.4K (Group 3 support)
• V.8 and AutoMode
• 2 RJ-11 phone jacks for telephone line and handset
• Voice Answering Machine and ADPCM voice compression/decompression

CPU:
- Pentium 166 MHz MMX or higher ( Pentium 233 MMX required for V.80/Video Phone )
- AMD K6-200 MHz or higher
- Cyrix 6x86MX PR200 or higher
Memory: 32 MB or more
Operation System: Windows 95/98